Metal-Cutting Band Saws
Compare cutting envelope for rounds and rectangles at the angles you use.
Metal-Cutting Band Saws at a glance: Compare cutting envelope for rounds and rectangles at the angles you use. A saw sized for straight cuts may have a smaller capacity when the head or vise is set for a miter.
- Related equipment
- View comparison
- Buyer questions
- 4 answered
Side-by-side
Related equipment
| Equipment type | Where it fits |
|---|---|
| Press Brakes | Match available bending length, tooling and capacity to the material thickness and alloy. Verify the tonnage for the actual bend, die opening and length with the manufacturer. |
| Metal Lathes | Compare swing, spindle bore and usable distance between centers against the stock and fixture. A chuck or tailstock tool takes up working length inside the headline capacity. |
Buying guide
Metal-Cutting Band Saws: what to know before you buy
Compare cutting envelope for rounds and rectangles at the angles you use.
How to choose
- Compare capacity at the cut angle. Take the largest rectangular section you cut and the angle used for miters. Ask for vise opening and cutting capacity in that orientation. Include material support on both sides of the blade when planning the station.
- Use a representative drawing. Choose a regular job and a difficult one. Write down material, section, length and tolerance, then check usable travel with workholding and tooling fitted. Record setup time separately from the machining cycle.
- Compare tooling and changeovers. Price the required cutting tools, dies, fixtures and stock supports. For mixed short runs, an extra setup repeated dozens of times may matter more than a modest difference in rated speed.
- Compare setups on a repeat order. Choose one drawing with a tolerance you routinely hold and specify the material. Ask how the part is held, measured and repositioned, along with the tools included in the quote. Time the first finished piece separately from the rest of the run.
FAQ
Metal-Cutting Band Saws questions
Why check the vise layout?
Short stock, bundles and angled cuts need different clamping arrangements. Check supported stock lengths and vise movement against a sample job.
What makes repeat cuts faster?
Look at length stops, stock supports and feed control. Include infeed and outfeed space for full bars as well as the finished blanks.
What changes the cost per cut?
Price the recommended blade for your alloy and section. Time clamping, cutting and resetting the stop on a batch of representative parts.
Which drawings help a supplier quote accurately?
Provide a common part and one at the edge of your current capacity. Include material, tolerances, batch size and the surfaces or dimensions used for inspection.