Skip to content
  • Free freight on orders over $500
  • Authorized dealer · Full manufacturer warranty
  • Financing from 0% APR

Metalworking & Fabrication

Start with the material, its section or sheet size and the finished tolerance. Choose machinery around the part that must fit, the tooling it takes and how often the setup changes.

Metalworking & Fabrication at a glance: Bring a representative drawing and the material specification to the comparison. A machine can have generous headline capacity and still lack the tooling clearance or travel your part requires.

Equipment types
3
Equipment types at a glance
View comparison
Buyer questions
7 answered

Side-by-side

Equipment types at a glance

EquipmentWhen to consider it
Metal-Cutting Band SawsCompare cutting envelope for rounds and rectangles at the angles you use. A saw sized for straight cuts may have a smaller capacity when the head or vise is set for a miter.
Press BrakesMatch available bending length, tooling and capacity to the material thickness and alloy. Verify the tonnage for the actual bend, die opening and length with the manufacturer.
Metal LathesCompare swing, spindle bore and usable distance between centers against the stock and fixture. A chuck or tailstock tool takes up working length inside the headline capacity.

Buying guide

Metalworking & Fabrication: what to know before you buy

Start with the material, its section or sheet size and the finished tolerance. Choose machinery around the part that must fit, the tooling it takes and how often the setup changes.

How to choose

  • Compare setups on a repeat order. Choose one drawing with a tolerance you routinely hold and specify the material. Ask how the part is held, measured and repositioned, along with the tools included in the quote. Time the first finished piece separately from the rest of the run.
  • Use a representative drawing. Choose a regular job and a difficult one. Write down material, section, length and tolerance, then check usable travel with workholding and tooling fitted. Record setup time separately from the machining cycle.
  • Compare tooling and changeovers. Price the required cutting tools, dies, fixtures and stock supports. For mixed short runs, an extra setup repeated dozens of times may matter more than a modest difference in rated speed.
  • Compare capacity at the cut angle. Take the largest rectangular section you cut and the angle used for miters. Ask for vise opening and cutting capacity in that orientation. Include material support on both sides of the blade when planning the station.
  • Quote a finished part drawing. Supply alloy, thickness, bend length, flange dimensions and tolerances. Ask the vendor to identify tooling for the entire bend sequence and where a previously formed flange could interfere with the machine.
  • Check the setup around the workpiece. Compare a typical part in its actual workholding arrangement. Chuck jaws, centers, tooling and the tailstock all use space. Ask the supplier to walk through both a short large-diameter part and your longest shaft.

FAQ

Metalworking & Fabrication questions

Why check the vise layout?

Short stock, bundles and angled cuts need different clamping arrangements. Check supported stock lengths and vise movement against a sample job.

Why does throat depth matter?

A flange may need to extend past the tooling line. Check throat depth, daylight and tool access using the largest formed part on the drawing.

Why check spindle bore?

Long bar work often passes through the spindle. Compare the actual stock diameter, workholding system and supported bar arrangement for the job.

Which drawings help a supplier quote accurately?

Provide a common part and one at the edge of your current capacity. Include material, tolerances, batch size and the surfaces or dimensions used for inspection.

What changes the cost per cut?

Price the recommended blade for your alloy and section. Time clamping, cutting and resetting the stop on a batch of representative parts.

Does the quote include tooling for my first job?

Request an itemized list of punches, dies, holders and usable lengths. An advertised bed length alone cannot establish whether a particular part can be formed.

Can I reuse an existing chuck?

Identify the spindle nose, mounting arrangement and chuck specifications. Have the supplier confirm the approved fit for the exact machine and workholding setup.

Free Shipping Over $500

Freight to the lower 48. Liftgate +$150. Pickup available on select items.

Price-Match Guarantee

We match any authorized dealer’s MAP-compliant price.

Full Manufacturer Warranty

Brand-new machines, factory-direct, with the full manufacturer warranty.

Talk to an Expert

(844) 455-4327 · Real people, Mon–Fri.