Construction & Concrete
Equip the job from base preparation to placement and cutting. Match the machine to the material, access, production rate and work window on site.
Construction & Concrete at a glance: Plan around the whole sequence. A large mixer needs a crew that can place its batch, and a faster saw still needs water or dust management and room to follow the cut.
- Equipment types
- 3
- Equipment types at a glance
- View comparison
- Buyer questions
- 7 answered
Side-by-side
Equipment types at a glance
| Equipment | When to consider it |
|---|---|
| Concrete Mixers | Compare usable mixing capacity with the volume your crew can place per cycle. Drum volume and finished batch yield are different figures on many spec sheets. |
| Walk-Behind Concrete Saws | Match required cut depth to the saw and compatible blade. Compare the cut material, available water supply and guidance system for the work you perform. |
| Plate Compactors | Compare plate width, travel direction and application to the base material and access. Tight trenches and broad paver areas create different maneuvering requirements. |
Buying guide
Construction & Concrete: what to know before you buy
Equip the job from base preparation to placement and cutting. Match the machine to the material, access, production rate and work window on site.
How to choose
- Plan deliveries around site access. Map the route from the drop-off point to the work area. Include ramps, gates, turning points and the space for supporting equipment. Compare machine weight and dimensions in both transport and working position.
- Size for the placement crew. Work back from the rate at which people can prepare the base, place concrete or complete cuts. A machine that outruns material handling may spend much of the day waiting.
- Check the delivery route. Record vehicle payload, lifting points, ramps and how the machine reaches the work face. Add the water, tools and consumables the selected process needs.
- Work backward from the pour. List the batches needed and where each will discharge. Compare usable mixed output, the route to placement and the height of the receiving cart. Leave a place for washout on the site plan.
- Price the saw with the blade you need. Give the supplier the slab material, cut length and required depth. Request a compatible blade and identify the consumables included with the machine. Include water-supply arrangements where the model requires them.
- Match the work area to the plate. Measure the narrowest trench or path and note the material and intended finish. Ask the supplier to identify an appropriate machine and any pad or wheel kit for the specific work. Check room at corners and ends.
FAQ
Construction & Concrete questions
What controls practical output?
Time the loading, mixing, discharge and return cycle. A larger machine adds little if the crew or transport carts cannot take the next batch.
Does blade diameter tell me the cut depth?
The usable depth depends on the machine and blade combination. Compare the model’s stated maximum cutting depth with your specified cut.
Forward or reversible?
Forward plates suit many open runs and lighter applications. Reversing travel helps in confined areas. Verify the machine is specified for your material and lift thickness.
What should a jobsite quote include?
Give the supplier the material, daily quantity, power or fuel available and site access constraints. Request the appropriate accessories and wear parts as separate line items.
Is drum volume the same as batch output?
Compare the manufacturer’s rated mixing capacity for the material. Gross drum volume includes space needed for mixing.
What should I measure for transport?
Check overall dimensions with the handle in its transport position, machine weight and the manufacturer’s specified loading provisions.
Does more centrifugal force always improve the result?
The application also depends on material, lift thickness and site specifications. Compare models against the compaction requirement for the actual job.