Pallet Stretch Wrappers
Compare turntable diameter, load height and film carriage with your typical and largest pallets.
Pallet Stretch Wrappers at a glance: Compare turntable diameter, load height and film carriage with your typical and largest pallets. Check how a forklift or pallet jack will load the platform.
- Related equipment
- View comparison
- Buyer questions
- 4 answered
Side-by-side
Related equipment
| Equipment type | Where it fits |
|---|---|
| Strapping Machines | Compare strap material, width and tension range with the carton or bundle. Measure the largest package in its strapped orientation against the machine opening. |
| Case Sealers | Choose tape-head configuration and conveyor height around the cartons you run. Compare the smallest and largest cases after they are filled and closed. |
Buying guide
Pallet Stretch Wrappers: what to know before you buy
Compare turntable diameter, load height and film carriage with your typical and largest pallets.
How to choose
- Time a complete pallet change. Include the time to position a pallet, attach film, wrap, cut the tail and remove the load. For mixed loads, ask for a demonstration on both a short dense pallet and the tallest uneven load you routinely ship.
- Time the full packaging cycle. Include the time to stage the load, position film or cartons, run the machine and clear the finished pack. A faster automatic cycle helps only when adjacent stations can keep up.
- Compare consumables per shipment. Use one representative pallet, bundle or carton. Record film, strap or tape used and whether the finished load meets the handling requirements. Repeat with the smallest and largest regular packages.
- Check the handoff between stations. Mark the height and direction of travel at each conveyor, table or pallet position. Time the slowest handoff during a normal run. A faster wrapping, strapping or sealing cycle adds little when finished loads wait at the exit.
FAQ
Pallet Stretch Wrappers questions
What changes for tall or light loads?
Load stability can affect acceptable rotation and wrap settings. Review the maximum envelope and the film control available for your products.
What should I compare about film use?
Ask about pre-stretch, supported roll sizes and adjustments at the top and bottom of the load. Compare film used per finished pallet on a representative load.
Will a pallet jack work with the turntable?
Compare entry height and ramp geometry with the loaded jack. Draw the approach and exit on the floor plan before choosing a ramp or low-profile table.
What samples should I send for a packaging trial?
Send the lightest, heaviest and least stable loads you ship, together with the current carton, tape, strap or film specification. Ask for samples back so you can examine the result.