Food Prep Equipment
Choose prep machines for the ingredient, finished cut and batch size.
- 6 models
- From $4,960
- Free shipping over $500
- Full manufacturer warranty
Food Prep Equipment at a glance: Equipment Nation carries 6 new models in its Food Prep Equipment range, priced from $4,960 to $4,960. Freight ships free to the lower 48 on orders over $500, and every unit carries the full manufacturer warranty.
- Models
- 6
- Price range
- $4,960–$4,960
Side-by-side
Compare Food Prep Equipment
Key specs and prices for every model in this category. Prices include free freight to the lower 48 on orders over $500.
| Model | Slice thickness | Output | Loaf width | Net weight | Price |
|---|---|---|---|---|---|
| BakeMax BMGF001 | 7/16 in | Up to 240 loaves/h | Up to 15 in | 165 lb | $4,960.00 |
| BakeMax BMGF002 | 1/2 in | Up to 240 loaves/h | Up to 15 in | 165 lb | $4,960.00 |
| BakeMax BMGF003 | 9/16 in | Up to 240 loaves/h | Up to 15 in | 165 lb | $4,960.00 |
| BakeMax BMGF004 | 5/8 in | Up to 240 loaves/h | Up to 15 in | 165 lb | $4,960.00 |
| BakeMax BMGF005 | 3/4 in | Up to 240 loaves/h | Up to 15 in | 165 lb | $4,960.00 |
| BakeMax BMGF006 | 1 in | Up to 240 loaves/h | Up to 15 in | 165 lb | $4,960.00 |
Side-by-side
Related equipment
| Equipment type | Where it fits |
|---|---|
| Commercial Refrigeration | Reach-ins store cases and trays near receiving. Undercounter units supply a station, and refrigerated prep tables put ingredients within reach during assembly. Size around the containers you load, the space doors need to swing and how often staff return during service. |
| Cooking Equipment | Build the hot line around the dishes that must finish together. Ranges share heat across pots and pans, griddles give cooks a broad contact surface, and fryers dedicate a station to immersed foods. Compare recovery and usable cooking area as well as overall width. |
| Holding & Serving Equipment | Match holding equipment to the gap between production and service. An enclosed cabinet stages pans behind the line, while countertop warmers and buffet wells serve smaller batches at the point of use. Choose the form that fits the way staff refill the station. |
Buying guide
Food Prep Equipment: what to know before you buy
Choose prep machines for the ingredient, finished cut and batch size.
How to choose
- Compare finished yield per batch. Use the same ingredient, cut and portion size for each demonstration. Count acceptable portions after trimming and include changeover between recipes. Published feed rates may use a different product or cut.
- Design around peak service. Work backward from the pass. Count the orders finished in a rush, the pans used at each station and the reserve stock needed for the next batch. A refrigerator across the room can slow every ticket even when its total capacity is adequate.
- Plan receiving and installation. Record crated dimensions for delivery and installed dimensions for the final position. Include service access, doors and drawers at full travel. Give model-specific utility and ventilation sheets to the installer before the line is laid out.
- Trace a peak service from delivery to dish return. Sketch where staff receive, store, prepare, cook, serve and wash. Check door swings and access for cleaning while adjacent stations are occupied. The best place for an upgrade is often where tickets or racks start to queue.
FAQ
Food Prep Equipment questions
What should I bring to a comparison?
Bring a standard recipe, target portion or cut, and the prep quantity for a typical shift. Check that the machine accepts the size of the raw ingredient without excessive hand trimming.
Why compare clean-down time?
A machine that saves time on a large batch may take longer overall on several small recipes. Compare the parts removed for cleaning, how they are stored and the time needed between ingredients.
Which accessories belong in the budget?
List the discs, blades, bowls or agitators required by your recipes. Check which come with the machine and which must be purchased separately.
Can one attachment produce all our cuts?
Submit photos or dimensions for the finished cuts. Ask the supplier to identify each disc, blade or accessory required and its replacement price.
How do I compare complete kitchen equipment proposals?
Provide the same menu, peak covers, pan sizes, site plan and utility information. Request an itemized equipment list showing accessories, installation scope and assumptions.